need to get into gun cabinet?
Written by admin on January 24, 2009 – 6:27 pm -
My pap? ? passed away a few weeks ago and we have to enter the cabinet of his gun. a combination lock, I have the combination, but I can not even get me open? c '? it deceives? things i should know. I remember that I still had difficulties opening? it a couple years ago when my pap? was l? showing how to open it. Please if anyone can? tell me something greatly appreciate. thanks
Tags: Combination Lock, Dad, Gun Cabinet
Posted in FAQs |
By Douglas D on Jan 25, 2009 | Reply
Call a locksmith. If you have the combination, & pu? prove ownership? & dell'armadietto of the gun, it 's a blacksmith meets authorized pu? to open the locker in seconds, & then change or repair the lock cos? you don 't have the same problem.
By badbender001 on Jan 27, 2009 | Reply
The best way? to call a lock smith. L could get inside? without damaging the cabinet too. I don 't know what kind of combination lock but if you can see the lock then you can not cut them with bolts for chopping.
By honeylulu2 on Jan 27, 2009 | Reply
Most of combination locks you start with 3 complete turn 360 degrees to the right before the first number. Then turn a complete shot in the left (passing once the second number combination) prior to its two editions of the combination. Then turns to the right and stops at the third number. If this does not work, start with 3 complete the turn left before the first issue of the combination, then turned a full 360 degrees to the right before the second number. Then turns to the left directly in the third number. Is very accurate in stopping the numbers correct. ? unlikely that there is something wrong with the lock perch? locks on the lockers I 'of the gun, and the VE view? quality? nothing bad. Once the work carefully and precisely and it will open for you. Sorry for the loss of your father. I hope you find that you 're search.
By bayareamotard on Jan 31, 2009 | Reply
to borrow a grinder with a cutting wheel of the metal. close to open key
By LadyTazzy on Feb 2, 2009 | Reply
Ensure that you are starting out by turning the knob at least 2 full turn before you begin to enter the mix. The first issue for the combination, turn the knob on the right. The second number? the left and the third? to the right and then pull the lock. It should open up. Good luck and I 'm sorry about the loss of your pap?. I just lost my mother 2 weeks ago.
By Wylie Coyote on Feb 3, 2009 | Reply
After considerable effort with the combination, call the professional blacksmith. I did last week when I locked myself in my Ministry of Interior. Instead of replacing manufacturing facility door of the $ 200) (they cost $ 55. I didn 't want to spend the money, but little loss.
By charcoal rules on Feb 5, 2009 | Reply
Try removing the rear. Most are stapled above and can only be removed with a small screwdriver and pliers sniffing ago. Loosen with a screwdriver and pull the nose of the needle. If not call the blacksmith for 75 dollars. Good luck