question about rust on a gun?
Written by admin on December 31, 2008 – 6:00 am -
I just received my dad 'the model 94 .30 -. 30 Winchester s to be used for deer this field. He kept a gun cabinet with some of the other guns but it 's not to the humidity controlled so the gun had a little rust that I could see. All the way completely dissassembled the thing up and the interior parts are great considering this gun has been made in 1973. But the outside, the burnishing has very little points of rust if you appear to close under a lamp. I clean the inside and outside (total work of 6hrs), but the wells are still there. Anyone who knows rid of the wells? I 'm I 'sure, the ll must take part in it and still revealing and reblue it. But continu Aare polished down with a rag and I 'impregnated with oil; m. that gets little out at a time. The gun seems great until you keep under a light and be close. Continu Aare just polishing (pun intended) or after this reblue of deer season it? The PSI must reblue aversion to shoot but if I have to I will do this for a cuzz i 'm. going to get it to work along with my kids when I 'm way. Yes, as I said the points are no larger than the period at the end of this sentence.
Tags: Guns, Little Bit, Winchester Model 94
Posted in FAQs |
By B. Miller on Dec 31, 2008 | Reply
Using oil of gun and wools the bronze. It 's worked well for me.
By carnaby_fudge on Jan 1, 2009 | Reply
to remove the wells you 'll probably has the reblue. I have a similar problem on GA 16. shotgun. the clean and care and clean but a little more rust continu Aare return. it 's probably worth the time and investment if you want the gun last another generation.
By bound on Jan 1, 2009 | Reply
Bound 's hubby here: You can not remove the pits, are an erosion of the metal. You can pretty easily remove the rust. Take a small portion of 000 steel wool and has some oil on the gun arrugginita area and the slightly polished steel wool. This should take care of rust. You must repeat the process several times to completely remove the rust. My advice, does not re-blue your gun … that the burnishing consumed add to the rifle and will have more significance not only to the rifle, but the stories that have grown with it! Good luck and enjoy!
By Knowledge on Jan 3, 2009 | Reply
If there are wells you have two choices. 1) kills and controls the rust with oil and active lives with wells. 2) enamel and has completely professional hot-blue. Un'annata 1973 94 will not? probably never a collector 's article, so that a smooth re-blue probably improve? value if the wells are actually subtracting from.
By James J on Jan 4, 2009 | Reply
the question is, the surface is really pierced, or is still rust on the surface as "very small; blooms? The wells will form over time under the blooms of rust. an oily cloth not remove the rust and unless it is removed, a well continue to form below. to remove the rust, metal signs lightly with steel wool that overnight you can get your hands on about liberalmente sprayed with wd-40, not concentrating your efforts on the points just themselves but also over the entire shares made . This will remove the rust, which costs a little thinning of burnishing. However, don 't circle, because the steel wool by rubbing the surface of burnishing a po'pure, making the party a po'lucido and rust damage harder to see. finished with a good coat of oil heavier and be happy you have interfered the problem before the next deer season!
By Richard J on Jan 8, 2009 | Reply
I have one of those by giving it to my son. I did just the outside with a sponge scrubb of plastic coated in oil gun, then clean it all with a dry cloth and added a layer of the CLP whole affair. I have guns over 20 years that I bought new I do this and do not rust has never returned.
By Christina C on Jan 9, 2009 | Reply
I have to agree with Bound 's husband here. Re-burnishing the lower the value musket, remove it with 'character s. We usually balistol to it and just really polished points of rust with some steel wool ends. The cleans up really well, he said. Reblued a pair of pistols that had no value to us, except the support that we cheapy attachment around. I corredi reblueing leaving are really easy to use and look great once the facts. I wouldn 't anyway. Put just a really heavy coat of Balistol above and puliscalo good and often. We have around 70 (some more worthy of my home) and we have them often, living on the coast with all the moisture. Balistol was the key.
By boundferheaven on Jan 9, 2009 | Reply
puliscalo just good and maintains a thin coat of oil on all parts of the gun metal and puliscalo gi? every time you come home with it. do not let rust start again. you do not have a gun extremely important, you have a good gun anyway. prendale just care now and do not worry for very small wells. the conclusion up to pi? money and time on worthy get it repaired or disguised to re-burnishing. Finch? Good shooting and keep it clean it lasted many years while? taken care of. puntinatura the occupation? purely cosmetic unless it is dug inside the Barrell. if the rifling of your Barrell? Male laundry lose much accuracy. but if the rifling? still rather then just firing the gun and Godal. re-bluieng not worth the cost compared to the value of the gun.
By sigmond on Jan 12, 2009 | Reply
sometimes working at a factory and we plateing blue and plated barrels of the gun. invovles this that make the ***** and that away lucidano all infomitys and then cleaning then make a trader which appears blue holding the test of time. tries this season and then pay the little extra to get a reblue plateing of your gun. This will solve your problems of rust on hold until the weapon clean. the blue liquid from a bottle can never acieave the depth and shine of a professional burnishing. The youll Gradica the result. be sure if you ask ensure that their work so if one part is lost or damaged replace the free.
By CIH(Ret) on Jan 14, 2009 | Reply
I worked in the same thing on several guns that I have sold or bought. I found that using 0000 steel wool and WD40 can remove most of the rust that I met. The 0000 steel wool are fine for damaging the burnishing and just remove the rust. If you're digging and? bad enough that you want to remove them, you have polished off. There? ? probably a job left the pi? become a professional. Can make it yourself? probably lead to a wavy surface that doesn 't look very good. If the puntinatura not? very deep, the steel wool usually enough to take good care. It won 't free if but when? just great to start with, like your rings, the steel wool and treatment WD40 hide? the wells so that they are just remarkable. Use a good burnishing cold to touch up all the places that show wear. Follow directions carefully and finish up there with a gun to look nice. Good luck.
By boardguy03 on Jan 16, 2009 | Reply
S.O.S. The relief work well for the removal of rust. Entire you got to do is water them and dell'Asino to friction when the rust is to remove it. I used to use it on my bike when I clean.
By Bazooka punk on Jan 18, 2009 | Reply
The limit? the right to a point. Use steel wool to polish off the rust. then use a home kit or burnishing the rust will come back?. Do not look? nice work as a professional hot Burnishing but like you say, you have to observe the order and to keep them lit.